PHP 8.3.4 Released!

mail

(PHP 4, PHP 5, PHP 7, PHP 8)

mailОтправляет электронную почту

Описание

mail(
    string $to,
    string $subject,
    string $message,
    array|string $additional_headers = [],
    string $additional_params = ""
): bool

Отправляет электронную почту.

Список параметров

to

Получатель, или получатели письма.

Формат строки по правилам стандарта » RFC 2822. Примеры:

  • user@example.com
  • user@example.com, anotheruser@example.com
  • User
  • User , Another User

subject

Тема отправляемого письма.

Предостережение

Тема должна удовлетворять правилам стандарта » RFC 2047.

message

Отправляемое сообщение.

Каждая строка должна быть отделена комбинацией символом CRLF (\r\n). Строки не должны быть длиннее 70 символов.

Предостережение

(Только для Windows) Если при прямом обращении PHP к SMTP-серверу в начале строки обнаружена обозначающая конец предложения точка, она удаляется. Чтобы противодействовать этому, эти вхождения заменяют двойной точкой.

<?php

$text
= str_replace("\n.", "\n..", $text);

?>

additional_headers (необязательный)

Строка или массив, которые будут вставлены в конец заголовка письма.

Чаще этим пользуются, чтобы добавить дополнительные заголовки (From, Cc, и Bcc). Дополнительные заголовки разделяют комбинацией символов CRLF (\r\n). Если в составлении заголовка участвуют внешние данные, их очищают, чтобы исключить риск внедрения нежелательных заголовков.

Если передан массив, то его ключи будут именами заголовка, а значения значениями.

Замечание:

Отправляемое письмо должно содержать заголовок From. Его устанавливают через параметр additional_headers или задают значение по умолчанию в файле php.ini.

Если заголовок отсутствует, будет выдано сообщение об ошибке наподобие Warning: mail(): "sendmail_from" not set in php.ini or custom "From:" header missing. Заголовок From также определяет заголовок Return-Path при прямой отправке через SMTP-сервер (только Windows).

Замечание:

Если сообщения не отправляются, пробуют указать только символ LF (\n). Некоторые агенты пересылки сообщений Unix (особенно » qmail) автоматически заменяют символ перевода строки LF на комбинацию символов CRLF (что удваивает символ возврата каретки CR, если было указано CRLF). Эту меру выбирают в крайнем случае, поскольку она не соответствует стандарту » RFC 2822.

additional_params (необязательный)

Параметр additional_params задают, чтобы передать дополнительные флаги в виде аргументов командной строки для программы, настроенной в директиве sendmail_path для отправки писем. Например, этим пользуются при отправке письма агентом sendmail с аргументом -f, чтобы установить адрес отправителя конверта.

Параметр автоматически экранируется функцией escapeshellcmd(), чтобы предотвратить выполнение команды. Функция escapeshellcmd() исключает выполнение команды, но разрешает дополнительные параметры. По соображениям безопасности рекомендовано очищать этот параметр, чтобы не допустить добавления нежелательных параметров в команду командной оболочки.

Поскольку функция escapeshellcmd() обрабатывает параметр автоматически, часть символов, разрешённых интернет-стандартами в качестве адресов электронной почты, нельзя указывать. Функция mail() не разрешает такие символы, поэтому в программах, в которых они требуются, рекомендовано использовать альтернативы для их отправки (например, фреймворки или библиотеки).

Пользователь, от имени которого запущен веб-сервер, должен быть добавлен в конфигурацию агента sendmail в качестве доверенного пользователя, чтобы предотвратить добавление заголовка «X-Warning» в сообщение, когда отправитель конверта установлен через аргумент (-f). Для пользователей агента sendmail — это файл /etc/mail/trusted-users.

Возвращаемые значения

Возвращает true, если письмо было принято для передачи, иначе false.

То, что письмо было принято для передачи, не значит, что оно достигнет получателя.

Список изменений

Версия Описание
7.2.0 Параметр additional_headers теперь принимает массив.

Примеры

Пример #1 Отправка письма.

Вызов функции mail() для отправки простого письма:

<?php

// Сообщение
$message = "Line 1\r\nLine 2\r\nLine 3";

// На случай если какая-то строка письма длиннее 70 символов, вызовем функцию wordwrap()
$message = wordwrap($message, 70, "\r\n");

// Отправляем
mail('caffeinated@example.com', 'My Subject', $message);

?>

Пример #2 Отправка письма с дополнительными заголовками.

Добавление простых заголовков, сообщающих почтовому агенту адреса From и Reply-To:

<?php

$to
= 'nobody@example.com';
$subject = 'the subject';
$message = 'hello';
$headers = 'From: webmaster@example.com' . "\r\n" .
'Reply-To: webmaster@example.com' . "\r\n" .
'X-Mailer: PHP/' . phpversion();

mail($to, $subject, $message, $headers);

?>

Пример #3 Отправка письма с дополнительными заголовками, переданными массивом

В этом примере посылается то же письмо, что и в примере выше, но дополнительные заголовки задаются массивом (доступно с PHP 7.2.0).

<?php

$to
= 'nobody@example.com';
$subject = 'the subject';
$message = 'hello';
$headers = array(
'From' => 'webmaster@example.com',
'Reply-To' => 'webmaster@example.com',
'X-Mailer' => 'PHP/' . phpversion()
);

mail($to, $subject, $message, $headers);

?>

Пример #4 Отправка письма с дополнительными аргументами командной строки.

Параметр additional_params указывают, чтобы передать дополнительный аргумент программе, настроенной в директиве sendmail_path для отправки писем.

<?php

mail
('nobody@example.com', 'the subject', 'the message', null,
'-fwebmaster@example.com');

?>

Пример #5 Отправка HTML-сообщения

Функцией mail() можно также отправить электронное письмо в формате HTML.

<?php

// Несколько получателей
$to = 'johny@example.com, sally@example.com'; // Обратите внимание на запятую

// Тема письма
$subject = 'Birthday Reminders for August';

// Текст письма
$message = '
<html>
<head>
<title>Birthday Reminders for August</title>
</head>
<body>
<p>Here are the birthdays upcoming in August!</p>
<table>
<tr>
<th>Person</th><th>Day</th><th>Month</th><th>Year</th>
</tr>
<tr>
<td>Johny</td><td>10th</td><td>August</td><td>1970</td>
</tr>
<tr>
<td>Sally</td><td>17th</td><td>August</td><td>1973</td>
</tr>
</table>
</body>
</html>
'
;

// Для отправки HTML-письма должен быть установлен заголовок Content-type
$headers[] = 'MIME-Version: 1.0';
$headers[] = 'Content-type: text/html; charset=iso-8859-1';

// Дополнительные заголовки
$headers[] = 'To: Mary <mary@example.com>, Kelly <kelly@example.com>';
$headers[] = 'From: Birthday Reminder <birthday@example.com>';
$headers[] = 'Cc: birthdayarchive@example.com';
$headers[] = 'Bcc: birthdaycheck@example.com';

// Отправляем
mail($to, $subject, $message, implode("\r\n", $headers));

?>

Замечание:

Для отправки HTML-сообщений или других сложных электронных писем рекомендована установка PEAR-пакета » PEAR::Mail_Mime.

Примечания

Замечание:

Реализация SMTP (только Windows) функции mail() в Windows во многом отличается от реализации в агенте sendmail. Во-первых, она не использует локальную программу для составления писем, а работает непосредственно с сокетами, что означает что необходим почтовый агент (MTA), ожидающий соединений на сокете (который может быть как на локальной, или localhost, так и на удалённой машине).

Во-вторых, дополнительные заголовки наподобие: From:, Cc:, Bcc: и Date: интерпретируются в первую очередь не почтовым агентом MTA, а PHP.

Поэтому параметр to не должен быть адресом вида "Something <someone@example.com>". Команда mail может неправильно интерпретировать этот адрес во время передачи данных почтовым агентом MTA.

Замечание:

Функция mail() не рекомендована для отправки большого количества писем в цикле. Функция открывает и закрывает SMTP-сокет для каждого письма, что не очень эффективно.

Для отправки большого количества сообщений обратите внимание на пакеты » PEAR::Mail и » PEAR::Mail_Queue.

Замечание:

Полезные RFC: » RFC 1896, » RFC 2045, » RFC 2046, » RFC 2047, » RFC 2048, » RFC 2049 и » RFC 2822.

Смотрите также

add a note

User Contributed Notes 20 notes

up
29
Anonymous
7 years ago
Security advice: Although it is not documented, for the parameters $to and $subject the mail() function changes at least \r and \n to space. So these parameters are safe against injection of additional headers. But you might want to check $to for commas as these separate multiple addresses and you might not want to send to more than one recipient.

The crucial part is the $additional_headers parameter. This parameter can't be cleaned by the mail() function. So it is up to you to prevent unwanted \r or \n to be inserted into the values you put in there. Otherwise you just created a potential spam distributor.
up
26
php at simoneast dot net
6 years ago
Often it's helpful to find the exact error message that is triggered by the mail() function. While the function doesn't provide an error directly, you can use error_get_last() when mail() returns false.

<?php
$success
= mail('example@example.com', 'My Subject', $message);
if (!
$success) {
$errorMessage = error_get_last()['message'];
}
?>

(Tested successfully on Windows which uses SMTP by default, but sendmail on Linux/OSX may not provide the same level of detail.)

Thanks to https://stackoverflow.com/a/20203870/195835
up
5
priyanshkala3 at gmail dot com
3 months ago
Sending mail using XAMPP server

I encountered numerous issues while attempting to send emails using the XAMPP server. However, I eventually found the correct method to accomplish it.

Configuring PHP's mail functionality to work with Gmail's SMTP server involves editing the `php.ini` and `sendmail.ini` configuration files. Below are the formal steps for setting up PHP to send emails through Gmail's SMTP server using XAMPP:

Configuring php.ini:

1. Open `php.ini` in an editor:
Open the `php.ini` configuration file in your preferred text editor.

2. Locate the mail function:
Use the search function (Ctrl + F) to find the section related to the mail function within the `php.ini` file.

3. Update mail function settings:
Copy and paste the following configuration parameters into the mail function section. Comment out or disable all other settings related to mail.

php.ini code to be edited:

SMTP=smtp.gmail.com
smtp_port=587
sendmail_from = yourmail@gmail.com
sendmail_path = write_sendmail.exe_path


4. Save the changes:
Save the `php.ini` file after applying the modifications.

Configuring sendmail.ini (in XAMPP folder):

1. Open `sendmail.ini` in XAMPP folder:
Locate and open the `sendmail.ini` configuration file within the XAMPP directory.

2. Adjust SMTP settings:
Insert the following content into the `sendmail.ini` file, marking other configurations as comments:

sendmail.ini code :

smtp_server=smtp.gmail.com
smtp_port=587
error_logfile=error.log
debug_logfile=debug.log
auth_username=yourmail@gmail.com
auth_password=app_password_after_enabling_two_factor_authentication_for_your_mail_id
force_sender=priyansh.kala.4@gmail.com


3. Save the changes:
Save the `sendmail.ini` file after inserting the specified configurations.

These steps configure PHP to utilize Gmail's SMTP server for sending emails. Ensure that the modifications are saved and that the necessary XAMPP services are restarted for the changes to take effect.

Please note that using hardcoded passwords in configuration files poses a security risk. Storing passwords directly in plain text files should be avoided in production environments. Consider using environment variables or secure credential management systems for better security practices.

Code for sending mail-:

<?php
$subject
= "Mail for checking";
$msg = "Hey! Let us play with PHP.";
$receiver = "reciever@gmail.com";
mail($receiver, $subject, $msg);
?>
up
21
Anonymous
4 years ago
If you notice wrong displayed characters in the email it's because you need to properly set the Content-Type and the Charset in the headers of the email:

<?php
$headers
= 'Content-Type: text/plain; charset=utf-8' . "\r\n";
?>

Mostly, UTF-8 is your best choice.

You can set custom headers with the fourth parameter of the mail() function.

To make the whole thing waterproof, add the following header too:

<?php
$headers
.= 'Content-Transfer-Encoding: base64' . "\r\n";
?>

Now you can use the combination of UTF-8 and Base64 to properly encode the subject line and the recipient name like this:

<?php
$subject
= '=?UTF-8?B?' . base64_encode('Test email with German Umlauts öäüß') . '?=';
$recipient = '=?UTF-8?B?' . base64_encode('Margret Müller') . '?= <recipient@domain.com>';
?>

And don't forget to Base64 encode the email message too:

<?php
$message
= base64_encode('This email contains German Umlauts öäüß.');
?>

All references are taken from:
https://dev.to/lutvit/how-to-make-the-php-mail-function-awesome-3cii
up
10
charles dot fisher at arconic dot com
6 years ago
I migrated an application to a platform without a local transport agent (MTA). I did not want to configure an MTA, so I wrote this xxmail function to replace mail() with calls to a remote SMTP server. Hopefully it is of some use.

function xxmail($to, $subject, $body, $headers)
{
$smtp = stream_socket_client('tcp://smtp.yourmail.com:25', $eno, $estr, 30);

$B = 8192;
$c = "\r\n";
$s = 'myapp@someserver.com';

fwrite($smtp, 'helo ' . $_ENV['HOSTNAME'] . $c);
$junk = fgets($smtp, $B);

// Envelope
fwrite($smtp, 'mail from: ' . $s . $c);
$junk = fgets($smtp, $B);
fwrite($smtp, 'rcpt to: ' . $to . $c);
$junk = fgets($smtp, $B);
fwrite($smtp, 'data' . $c);
$junk = fgets($smtp, $B);

// Header
fwrite($smtp, 'To: ' . $to . $c);
if(strlen($subject)) fwrite($smtp, 'Subject: ' . $subject . $c);
if(strlen($headers)) fwrite($smtp, $headers); // Must be \r\n (delimited)
fwrite($smtp, $headers . $c);

// Body
if(strlen($body)) fwrite($smtp, $body . $c);
fwrite($smtp, $c . '.' . $c);
$junk = fgets($smtp, $B);

// Close
fwrite($smtp, 'quit' . $c);
$junk = fgets($smtp, $B);
fclose($smtp);
}
up
6
Mark Simon
4 years ago
It is worth noting that you can set up a fake sendmail program using the sendmail_path directive in php.ini.

Despite the comment in that file, sendmail_path also works for Window. From https://www.php.net/manual/en/mail.configuration.php#ini.sendmail-path:

This directive works also under Windows. If set, smtp, smtp_port and sendmail_from are ignored and the specified command is executed.
up
11
Porjo
13 years ago
Make sure you enclose \r\n in double quotes (not single quotes!) so that PHP can translate that into the correct linefeed code
up
7
chris at ocproducts dot com
6 years ago
The 'sendmail' executable which PHP uses on Linux/Mac (not Windows) expects "\n" as a line separator.

This executable is a standard, and emulated by other MTAs.

"\n" is confirmed required for qmail and postfix, probably also for sendmail and exim but I have not tested.

If you pass through using "\r\n" as a separator it may appear to work, but your email will be subtly corrupted and some middleware may break. It only works because some systems will clean up your mistake.

If you are implementing DKIM be very careful, as DKIM checks will fail (at least on popular validation tools) if you screw this up. DKIM must be calculated using "\r\n" but then you must switch it all to "\n" when using the PHP mail function.

On Windows, however, you should use "\r\n" because PHP is using SMTP in this situation, and hence the normal rules of the SMTP protocol (not the normal rules of Unix piping) apply.
up
5
pangz dot lab at gmail dot com
3 years ago
* Sending email with attachment

function sendMail(
string $fileAttachment,
string $mailMessage = MAIL_CONF["mailMessage"],
string $subject = MAIL_CONF["subject"],
string $toAddress = MAIL_CONF["toAddress"],
string $fromMail = MAIL_CONF["fromMail"]
): bool {

$fileAttachment = trim($fileAttachment);
$from = $fromMail;
$pathInfo = pathinfo($fileAttachment);
$attchmentName = "attachment_".date("YmdHms").(
(isset($pathInfo['extension']))? ".".$pathInfo['extension'] : ""
);

$attachment = chunk_split(base64_encode(file_get_contents($fileAttachment)));
$boundary = "PHP-mixed-".md5(time());
$boundWithPre = "\n--".$boundary;

$headers = "From: $from";
$headers .= "\nReply-To: $from";
$headers .= "\nContent-Type: multipart/mixed; boundary=\"".$boundary."\"";

$message = $boundWithPre;
$message .= "\n Content-Type: text/plain; charset=UTF-8\n";
$message .= "\n $mailMessage";

$message .= $boundWithPre;
$message .= "\nContent-Type: application/octet-stream; name=\"".$attchmentName."\"";
$message .= "\nContent-Transfer-Encoding: base64\n";
$message .= "\nContent-Disposition: attachment\n";
$message .= $attachment;
$message .= $boundWithPre."--";

return mail($toAddress, $subject, $message, $headers);
}

* Sending email in html

function sendHtmlMail(
string $mailMessage = MAIL_CONF["mailMessage"],
string $subject = MAIL_CONF["subject"],
array $toAddress = MAIL_CONF["toAddress"],
string $fromMail = MAIL_CONF["fromMail"]
): bool {

$to = implode(",", $toAddress);
$headers[] = 'MIME-Version: 1.0';
$headers[] = 'Content-type: text/html; charset=iso-8859-1';
$headers[] = 'To: '.$to;
$headers[] = 'From: '.$fromMail;

return mail($to, $subject, $mailMessage, implode("\r\n", $headers));
}
up
5
eeeugeneee
6 years ago
Send mail with minimal requirements from email services.

<?php
$encoding
= "utf-8";

// Preferences for Subject field
$subject_preferences = array(
"input-charset" => $encoding,
"output-charset" => $encoding,
"line-length" => 76,
"line-break-chars" => "\r\n"
);

// Mail header
$header = "Content-type: text/html; charset=".$encoding." \r\n";
$header .= "From: ".$from_name." <".$from_mail."> \r\n";
$header .= "MIME-Version: 1.0 \r\n";
$header .= "Content-Transfer-Encoding: 8bit \r\n";
$header .= "Date: ".date("r (T)")." \r\n";
$header .= iconv_mime_encode("Subject", $mail_subject, $subject_preferences);

// Send mail
mail($mail_to, $mail_subject, $mail_message, $header);
?>
up
1
imme_emosol
1 year ago
Also see chunk_split (as "alternative" to wordwrap).
up
1
atesin > gmail
1 year ago
mail() internals:

doing some tests i can say... if sendmail_path is defined in php.ini or by ini.set(), by calling function like...

mail($to, $subject, $message, $headers, $params)

would be like if php open a shell internally, execute this command, send this text to stdin, and return true if return value == 0

------------
shell> $sendmail_path $params
To: $to
Subject: $subject
$headers

$message
(EOF)
------------

in windows instead using php smtp which is very limited, i prefer to force use sendmail-like behavior, by setting sendmail_path and then use msmtp for windows
up
3
pavel.lint at vk.com
11 years ago
Here's a small handy function I use to send email in UTF-8.

<?php
function mail_utf8($to, $from_user, $from_email,
$subject = '(No subject)', $message = '')
{
$from_user = "=?UTF-8?B?".base64_encode($from_user)."?=";
$subject = "=?UTF-8?B?".base64_encode($subject)."?=";

$headers = "From: $from_user <$from_email>\r\n".
"MIME-Version: 1.0" . "\r\n" .
"Content-type: text/html; charset=UTF-8" . "\r\n";

return
mail($to, $subject, $message, $headers);
}
?>
up
0
ABOMB
12 years ago
I was having delivery issues from this function to Gmail, Yahoo, AOL, etc. I used the notes here to figure that you need to be setting your Return-Path to a valid email to catch bounces. There are two extra delivery gotchas on top of that:

1) The domain in the email used in the -f option in the php.ini sendmail parameter or in the mail() extra parameters field, needs to have a valid SPF record for the domain (in DNS as a "TXT" record type for sure and add an additional "SPF" type record if possible). Why? That's header field being used for spam checks.

2) You should also use a domain key or DKIM. The trick here is that the domain key/DKIM is case sensitive! I used Cpanel to create my domain key which automatically used all lowercase domain names in the key creation. I found when sending email and using a camel case "-f account@MyDomainHere.Com" option, my key was not accepted. However it was accepted when I used "-f account@mydomainhere.com".

There are many other factors that can contribute to mail not getting to inboxes, including your own multiple failed testing attempts, so I suggest you consult each site's guidelines and don't ask me for help. These are just the couple technical issues that helped my case.

I hope this saves someone some time and headaches...
up
0
Ben Cooke
18 years ago
Note that there is a big difference between the behavior of this function on Windows systems vs. UNIX systems. On Windows it delivers directly to an SMTP server, while on a UNIX system it uses a local command to hand off to the system's own MTA.

The upshot of all this is that on a Windows system your message and headers must use the standard line endings \r\n as prescribed by the email specs. On a UNIX system the MTA's "sendmail" interface assumes that recieved data will use UNIX line endings and will turn any \n to \r\n, so you must supply only \n to mail() on a UNIX system to avoid the MTA hypercorrecting to \r\r\n.

If you use plain old \n on a Windows system, some MTAs will get a little upset. qmail in particular will refuse outright to accept any message that has a lonely \n without an accompanying \r.
up
-3
rexlorenzo at gmail dot com
11 years ago
Be careful to not put extra spaces for the $headers variable.

For example, this didn't work on our servers:

$headers = "From: $from \r\n Bcc: $bcc \r\n";

But this did:

$headers = "From: $from\r\nBcc: $bcc\r\n";

Notice the removal of the spaces around the first \r\n.
up
-2
andrew at my-syte dot com
1 year ago
Regarding To:

be careful not to duplicate To in the additional_headers,

lest gmail already flags it thus:

host gmail-smtp-in.l.google.com [142.251.xx.xx]
SMTP error from remote mail server after end of data:
550-5.7.1 [xxx.xxx.xx.xx] This message is not RFC 5322 compliant, the issue is:
550-5.7.1 duplicate To headers. To reduce the amount of spam sent to Gmail,
550-5.7.1 this message has been blocked. Please review
550 5.7.1 RFC 5322 specifications for more information.
up
-2
Anonymous
11 months ago
So far I used the following to make sure special charakters where correctly shown in the mail subject:

<?php $subject = '=?utf-8?B?' . base64_encode($subject) . '?='; ?>

But with very long subjects, the header line gets longer than 76 chars and some e-mail servers really don't like that... So this is my new solution:

<?php $subject = substr(mb_encode_mimeheader("Subject: " . $subject, 'utf-8', 'B', "\r\n", 0), 9); ?>

Please note: I added "Subject: " in front of $subject and stripped it of afterwards. This is to make sure, that the necessarry space is reserved, as PHP will add the "Subject: " itself...
up
-16
Max AT
12 years ago
To define a mail sensitivity you have to put this line in the headers:

<?php
$headers
= "MIME-Version: 1.0\n" ;
$headers .= "Content-Type: text/html; charset=\"iso-8859-1\"\n";

$headers .= "Sensitivity: Personal\n";

$status = mail($to, $subject, $message,$headers);
?>

Possible Options:
Sensitivity: Normal, Personal, Private and Company-Confidential

These will be recognised and handled in Outlook, Thunderbird and others.
up
-37
php dot net at schrecktech dot com
19 years ago
When sending MIME email make sure you follow the documentation with the "70" characters per line...you may end up with missing characters...and that is really hard to track down...
To Top